Group Indications 1-4 - Siemens SICAM Q100 7KG95 Series Manual

16 Operating Parameters
16.2 Automation Functions
16.2.2

Group Indications 1-4

Parameter
Source
NOTES
Only the indications for the
parameterization of the
binary outputs are displayed
which can be used accord-
ing to the current device set-
tings.
Indications which are read
by Modbus slave devices
are available in the list box if
they were parameterized in
Modbus Master Mapping.
Source inverted
Logic operation
Group indication name
1)
31 bytes of UTF-8
406
Default Setting
-none-
no
NONE
Group Indication x
(x = 1 to 4)
Setting Range
-none-
Device OK
Battery Failure
Settings Load
Settings Check
Settings Activate
Modbus TCP OK
Ethernet Link Error
Time Synchronization Error
Primary NTP Server Error
Secondary NTP Server Error
Daylight Saving Time
Ethernet Link 2 Error
Default IP Address
Limit Violation x (x = 1 to 16)
Indication 1 from Remote
Indication 2 from Remote
Rotation Voltage Clockwise
Group Indication x (x = 1 to 4)
IEC 61850 Communication OK
SD Card Error
Voltage Event Available
Frequency Event Available
Voltage-Unbalance Event Available
Indication x from Remote (x = 3 to 14)
SICAM Subdevice 1 OK
SICAM Subdevice 2 OK
Binary Input x-N SICAM IO 1 (x = 1 to 3)
Binary Input x-P SICAM IO 1 (x = 1 to 3)
Binary Input x-N SICAM IO 2 (x = 1 to 3)
Binary Input x-P SICAM IO 2 (x = 1 to 3)
Load profile period closed
Load profile synchr. period
Load profile tariff x (x = 1 to 8)
*)
Binary input 1
*)
Binary input 2
Modbus RTU Master OK
New MSV record made
Indication x Slv y (x = 1 to 6; y = 1 to 8)
MQTT communication OK
*)
Designation can be changed during the
parameterization.
no
yes
NONE
OR
AND
Any
1)
Max. 31 characters
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
*)
*)
*)
*)
*)
*)
*)