Siemens SICAM Q100 7KG95 Series Manual page 235

9.3.7.4 Communication Serial via RS485 Interface
Default Settings and Setting Ranges of the Communication Serial
Table 9-31
Parameter
Bus protocol
Device address
Baud rate
Parity
Access rights
Communication supervision time
Baud rate
Parity
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Communication Serial Settings
Modbus RTU
Bus Protocol Modbus RTU (Slave)
1
19 200 bit/s
Even
Full
600 * 100 ms
Bus Protocol Modbus RTU Master
19 200 bit/s
Even
Default Setting
-none-
Modbus RTU
Modbus RTU Master
1 to 247
Acc. to list box
(see chapter 16)
Acc. to list box
(see chapter 16)
Full
Read only
0 s = none
100 ms to 6 553 400 ms
Acc. to list box
(see chapter 16)
Acc. to list box
(see chapter 16)
9 Operation at Use of a PC
9.3 Configuration of the Device
Setting Range
235