Siemens SICAM Q100 7KG95 Series Manual page 279

9.4.2.1 Events
Default Settings and Setting Options
Table 9-45
Parameter
Event record type
Start time
End Time
Measurement output
1)
For RVC event, there is no CSV or diagram available.
To display the values on the screen, proceed as follows:
✧
In the navigation window, select the Evaluation and data management menu and click Events.
Figure 9-97
✧
Select the desired Event record type in the list box according to Table 9-45 and specify the Start time
and End time using the calendar function.
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Value View and Evaluation - Events
Default Setting
Supply Voltage
Current date/time
Current date/time
Table
Value View Tab and Evaluation, Events Input/Output Window, Supply Voltage
9.4 Value View and Evaluation
Setting Options
Voltage event
Frequency event
Voltage-unbalance event
1)
RVC event
Any with calendar function
Time format: depends on date/time format config.
Any with calendar function
Time format: depends on date/time format config.
Table
CSV
9 Operation at Use of a PC
279