Siemens SICAM Q100 7KG95 Series Manual page 322

9 Operation at Use of a PC
9.5 Maintenance
9.5.6.4 OPC UA PubSub (MQTT)
NOTE
The diagnostic data of OPC UA PubSub (MQTT) is displayed only if you have activated OPC UA PubSub
(MQTT) in Configure Administrative Communication Ethernet.
If you have not activated OPC UA PubSub (MQTT), the option OPC UA PubSub (MQTT) is invisible under
Diagnosis in the navigation window.
✧
In the navigation window, select the Diagnosis menu and click OPC UA PubSub (MQTT).
The OPC UA PubSub (MQTT) input/output window opens. The diagnostic data of OPC UA PubSub
(MQTT) is then analyzed.
Figure 9-137
Broker and Network
The Broker and network section shows the following information:
Table 9-51
Parameter
Broker IP address or host name
Topic name
322
Maintenance Tab, Diagnosis OPC UA PubSub (MQTT) Input/Output Window
Information in the Broker and Network Section
Configured
Configured
Information
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019