Measured Quantities Submenus - Siemens SICAM Q100 7KG95 Series Manual

10 Operation at Use of the Display
10.4 Parameterization
10.4.2

Measured Quantities Submenus

NOTE
To return to the main menu from within any submenu, press the F4 Menu
Submenu Display Number 1 through 11, 20 and 33: Measured Quantities
• Voltage Vph-n, Voltage Vph-ph
• Current I
• Active Power P, React. Power Q, App. Power S, Total Power P, Q, S
• Power factor PF, Tot. Pwr.factor PF tot
• Disp. angles
• Frequency
• Active factor cos j
1 to 11, 20, 33
Measurement
Figure 10-7
Submenu Display Number 12 and 13: THDS Voltage and THDS Current
THDS-V
THDS-I
Figure 10-8
Submenu Display Number 14: Phasor Diagram
Phasor diagram
Figure 10-9
344
Enter
1.0 to 11.0, 20.0, 33.0
Instantaneous
measurement
Menu
Submenus of the Display Numbers 1 to 11, 20 and 33, Various Measured Quantities
Enter
12, 13 12.0, 13.0
THDS-Vph-n
THDS-I
Menu
Submenu Display Number 12 and 13, THDS V and THDS I
Enter
14
Graphic
Phasor diagram
Menu
Submenu Display Number 14, Phasor Diagram
Max
1.1 to 11.1, 20.1, 33.1
Maximum
Max
12.1, 13.1
THDS-Vph-n max
THDS-I max
Tab.
14.0 14.1
Table
Phasor diagram
softkey.
Min
1.2 to 11.2, 20.2, 33.2
Minimum
Inst.
Graph
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Inst.