Siemens SICAM Q100 7KG95 Series Manual page 38

4 Measured Quantities and Recording
4.1 Power Quality Measuring System and Recording System
Table 4-2
Recording
Fault recorder
Mains signaling
voltage recorder
Load profile re-
)
cording *
)
* For detailed information on the load profile, refer to chapter 5.
The respective measuring interval of the recording is time-stamped to enable a correct time evaluation.
38
Recording Measured Values (cont.)
Measured quantity
Voltages,
Currents,
Binary
Mains signaling
voltages on the supply
voltage
Load profile
Storage interval/storage
method
Voltage/current/binary
variation triggers,
acquisition of sampled values
(max. 3 s)
Mains signaling voltage
triggers, start time, acquisition
of 10/12 cycle voltages (max.
2 min)
Method Fixed Block or
method Rolling Block
E50417-H1040-C522-A6, Edition 06.2019
Application
Analyzing the causes of
power quality problems
Monitoring of the mains
signaling voltage according
to EN 50160
Determining the load profile
for supply and consumption
of electric power
SICAM Q100, 7KG95xx, Device Manual