Siemens SICAM Q100 7KG95 Series Manual page 282

9 Operation at Use of a PC
9.4 Value View and Evaluation
9.4.2.2 Records
Default Settings and Setting Options
Table 9-46
Record type
Start time
End time
Measurement source
Measurements
Aggregation Type
(The aggregation type is not displayed if
the frequency is 10 s, and flicker)
Measurement output
Query method
(only for trend recorder query)
282
Value View and Evaluation - Records
Parameter Default Setting
Measurement
recorder
Measurement Recorder
Current time
no setting, only display
Frequency 10 s
f - 10 s
AVG
Table
Trend Recorder
By time
Setting Options
Trend Recorder
Measurement recorder
Any with calendar function
Time format: depends on date/time
format config.
Frequency 10 s
Voltage
Current
Voltage angle
Current angle
Active power
Reactive power
Apparent power
Active power factor
Power factor
Phase angle
Frequency
Unbalance
THDS voltage
THDS current
Q1
Harmonic voltage magnitude
Harmonic current magnitude
Short-term flicker
Long-term flicker
The selectable Measurements
depend on the selected Measurement
Source.
AVG
MIN (not for harmonics)
MAX
Table
Diagram
CSV
By time
By event
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019