Lid and fuel filler flap opening systems
Reconnect the battery (
Use the relative release button and emergency release cable to check that the lock works correctly.
Close the lid and check that it remains closed after trying to force open with the hands.
F2.01).
Fit the cable clamp for the release cables (5) in the
seat on the lock (A), indicated by the orange
arrow.
Fit the retainer block (6) in the seat on the lock (A),
indicated by the red arrow.
Use the last retainer ring on the retainer block (6)
as shown in the photo aside.
Fit the lock (A) in the relative seat, using the
markings made during removal as reference.
Tighten the nuts indicated.
Tightening torque
Screw
Connect the connector (4).
Page 5 of 18
Nm
Class
9 Nm
B