Verify Or Create Node Section Dcc Terminations - Cisco NCS 2000 series Troubleshooting Manual

Alarm Troubleshooting
DETAILED STEPS
Step 1
Log into a node on the network.
Step 2 In node view (single-shelf mode) or shelf view (multishelf mode), click the Circuits tab.
Step 3
Click the circuit row to highlight it and click Delete.
Step 4 Click Yes in the Delete Circuits dialog box.

Verify or Create Node Section DCC Terminations

SUMMARY STEPS
1. Log into a node on the network.
2. In node view (single-shelf mode) or multishelf view (multishelf mode), click the Provisioning > Comm
Channels > SDCC (or Provisioning > Comm Channels > MS DCC) tab.
3. View the Port column entries to see where terminations are present for a node. If terminations are missing,
proceed to Step 4.
4. If necessary, create a DCC termination:
DETAILED STEPS
Step 1
Log into a node on the network.
Step 2 In node view (single-shelf mode) or multishelf view (multishelf mode), click the Provisioning > Comm Channels >
SDCC (or Provisioning > Comm Channels > MS DCC) tab.
Step 3 View the Port column entries to see where terminations are present for a node. If terminations are missing, proceed to
Step 4.
Step 4
If necessary, create a DCC termination:
a) Click Create.
b) In the Create SDCC Terminations (or Create MS DCC Terminations) dialog box, click the ports where you want to
create the DCC termination. To select more than one port, press the Shift key.
c) In the port state area, click the Set to IS (or Set to Unlocked) radio button.
d) Verify that the Disable OSPF on Link check box is unchecked.
e) Click OK.
Clear an MXP, TXP, GE-XP, 10GE-XP, and ADM-10G Card Loopback Circuit
SUMMARY STEPS
1. Log into a node on the network.
2. In node view (single-shelf mode) or shelf view (multishelf mode), double-click the reporting card in CTC
to open the card view.
3. Click the Maintenance > Loopback tabs.
4. In the Loopback Type column, determine whether any port row shows a state other than None.
Verify or Create Node Section DCC Terminations
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
455