Aps-No-Response - Cisco NCS 2000 series Troubleshooting Manual

APS-NO-RESPONSE

If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
APS-NO-RESPONSE
Default Severity: Minor (MN), Service Affecting (SA)
Logical Object: ODU
The APS-NO-RESPONSE alarm is raised when the requested or bridge signals of a SNC protection do not
match.
Clear the APS-NO-RESPONSE Alarm
Verify that the requested and bridge signals of SNC protection match.
If the alarm does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
APS-PROV-MISM
Default Severity: Minor (MN), Non-Service Affecting (NSA)
Logical Object: ODU
The APS-PROV-MISM alarm is raised when the SNC protection types on the near end and far end near are
incompatible.
Clear the APS-PROV-MISM Alarm
Verify that the near end and far end SNC protection types match.
If the alarm does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
AS-CMD
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
126
http://www.cisco.com/c/en/us/support/index.html
http://www.cisco.com/c/en/us/support/index.html
http://www.cisco.com/c/en/us/support/index.html
Alarm Troubleshooting