Cisco NCS 2000 series Troubleshooting Manual page 528

Hide thumbs Also See for NCS 2000 series:
Table of Contents

Advertisement

Error Messages Reference
Error/Warning
ID
WID-1042
EID-1043
WID-1044
EID-1046
EID-1047
EID-1048
EID-1049
EID-1050
EID-2001
EID-2002
EID-2003
EID-2004
EID-2005
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
482
Error/Warning Message
You have selected Java version {0}. This version is
outside of the recommended range and may cause an
unpredictable behavior of the software. Do you wish
to continue?
Error writing to file: {0}. This might be caused by a
directory permission, quota or disk volume full issue.
Warning: there is a discrepancy in the build timestamp
between the NE cached jar file ({0}) and the NE ({1}).
Your CTC jar cache should be emptied.
Selected CTC version ({0}) must be greater than or
equal{to the login NE version ({1}).
No additional Pseudo IOS windows may be opened at
this time. The maximum number of Pseudo IOS
windows are open.
This Pseudo IOS connection has been terminated.
Terminations are caused when the session has timed
out, the node resets, or when the exit command has
been invoked.
This may also occur when the maximum number of
concurrent Pseudo IOS connections has been reached.
A Pseudo IOS connection cannot be opened right now
on this node. Please try again later.
Connection failed on node {0}
No rolls were selected. {0}
The roll must be completed or canceled before it can
be deleted.
An error occurred while deleting the roll. {0}
No Cisco IOS slot was selected.
CTC cannot find the online help files for {0}. The files
might have been moved, deleted, or not installed. To
install online help, run the setup program on the
software CD.
Error Messages
Description
Refer to the warning message text.
Check for possible causes and try
again.
Refer to the warning message text.
The CTC software version must be
greater than or equal to the software
version on the node being managed.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
No rolls were selected for the bridge
and roll.
You cannot delete the roll unless it has
been completed or cancelled.
There was an error when CTC tried to
delete the roll.
You did not select a Cisco IOS slot.
CTC cannot find the online help files
for the specified window. The files
might have been moved, deleted, or
not installed. To install online help,
run the setup program on the software
CD.

Advertisement

Table of Contents
loading

Table of Contents