Ssm-Prc - Cisco NCS 2000 series Troubleshooting Manual

SSM-PRC

If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
SSM-PRC
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The SSM Primary Reference Clock (PRC) Traceable condition occurs when the SONET transmission level
for ADM-10G and MXP trunk ports is PRC.
Note
SSM-PRC is an informational condition and does not require troubleshooting.
SSM-PRS
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The SSM Primary Reference Source (PRS) Traceable condition occurs when the SSM transmission level for
ADM-10G and MXP trunk ports is Stratum 1 Traceable.
Note SSM-PRS is an informational condition and does not require troubleshooting.
SSM-RES
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The SSM Reserved (RES) For Network Synchronization Use condition occurs when the synchronization
message quality level for ADM-10G and MXP trunk ports is RES.
Note
SSM-RES is an informational condition and does not require troubleshooting.
SSM-SMC
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
404
http://www.cisco.com/c/en/us/support/index.html
Alarm Troubleshooting