Alarm Troubleshooting
OTDR-HYBRID-SCAN-IN-PROGRESS-RX
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: PPM
The Optical Time Domain Reflectometer (OTDR) Hybrid Scan In Progress RX condition occurs when a
hybrid OTDR scan starts in the RX direction.
Clear the OTDR-HYBRID-SCAN-IN-PROGRESS-RX Alarm
Step 1
This alarm is cleared automatically when the hybrid OTDR scan in the RX direction is complete.
Step 2
Alternatively, stop the scan by navigating to: Maintenance->DWDM->OTDR; select the side where the scan is ongoing
and click Cancel. The scan is stopped on both the sides.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
OTDR-HYBRID-SCAN-IN-PROGRESS-TX
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Objects: PPM
The Optical Time Domain Reflectometer (OTDR) Hybrid Scan In Progress TX condition occurs when a
hybrid OTDR scan starts in the TX direction.
Clear the OTDR-HYBRID-SCAN-IN-PROGRESS-TX Alarm
Step 1
This alarm is cleared automatically when the hybrid OTDR scan in the TX direction is complete.
Step 2
Alternatively, stop the scan by navigating to: Maintenance->DWDM->OTDR; select the side where the scan is ongoing
and click Cancel. The scan is stopped on both the sides.
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
OTDR-ORL-THRESHOLD-EXCEEDED-RX
Default Severity: Minor (MN)
Logical Object: EQUIPMENT
OTDR-HYBRID-SCAN-IN-PROGRESS-RX
http://www.cisco.com/c/en/us/support/index.html
http://www.cisco.com/c/en/us/support/index.html
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
335