Cisco NCS 2000 series Troubleshooting Manual page 578

Error Messages Reference
Error/Warning
ID
EID-5168
WID-5169
WID-5170
WID-5171
EID-5172
EID-5173
WID-5174
EID-5175
WID-5176
EID-5190
WID-5206
EID-5217
EID-5218
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
532
Error/Warning Message
Unable to set the Maintenance state for {0}
Some routers have responded not to start maintenance.
Do you still want to go ahead with the maintenance
activity?
Some Transport Admin States cannot be synchronized.
Network operation might be inconsistent.
Some routers have not responded with Embargo status.
Continuing maintenance activity may be traffic
affecting.
Are you sure you want to continue?
Provisionable patchcords can not be created between
incompatible ports.
Some Server Trail terminations were not repaired.
Routing constraints has been specified only for
protected path.
Can be evaluated to move some constraints on working
path since these are treated with priority.
Please consider that some good constraint on protected
part may not be evaluated correctly since that constraint
may be already applied to working path by auto-routing.
Do you want to continue anyway?
Unknown Error occurred while updating the SRLG
value on the CRS node(s).
{0}
One or more SVLANs are invalid.
Please remove them before continuing.
Unable to trace Layer 2 topology. The root link may
have been deleted.
Unable to clear proactive protection on the router. Do
it manually.
Error in trunk configuration on {0}.
Gmpls circuits can not be reconfigured.
Error Messages
Description
Complete node information could not
be retrieved.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Clear the proactive protection on the
router manually.
Refer to the error message text.
Refer to the error message text.