Cisco NCS 2000 series Troubleshooting Manual page 532

Error Messages Reference
Error/Warning
ID
EID-2056
EID-2059
EID-2060
EID-2061
EID-2062
EID-2063
EID-2064
EID-2065
EID-2066
EID-2067
EID-2068
EID-2069
EID-2070
EID-2071
EID-2072
EID-2073
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
486
Error/Warning Message
A communication error occurred: {0}
An error occurred while deleting the node. {0}
No PCA circuits were found.
An error occurred while provisioning the VLAN.
An error occurred while deleting VLANs. No VLAN(s)
were selected. Please select a VLAN.
The default VLAN cannot be deleted.
An error occurred while deleting VLANs. {0}
The profile cannot be imported. The profile "{0}" exists
in the editor and the maximum number of copies (ten)
exists in the editor. The import will be aborted. The
profile has already been loaded eleven times.
The profile could not be stored. An error occurred while
writing to {0}.
An error occurred while writing to the file. {0}
The alarm profile could not be loaded from the node.
The file could not be found or an I/O exception
occurred. {0}
The profile could not be deleted. {0}
Only one column may be highlighted.
Only one profile may be highlighted.
This column is permanent and cannot be removed.
Error Messages
Description
An internal error occurred in Network
Alarm tab while synchronizing alarms
with the nodes.
There was an error during the node
deletion.
CTC could not find any protection
channel access (PCA) circuits for this
task.
There was an error defining the
VLAN.
Refer to the error message text.
The selected VLAN is the default
VLAN and cannot be deleted.
There was an error deleting the
specified VLAN.
Cannot import the profile because the
profile has reached the maximum
number of copies in the editor.
CTC encountered an error while trying
to store the profile.
CTC encountered an error while
writing the specified file.
CTC encountered an error trying to
load the alarm profile from the node.
Either the specified file was not found,
or there was an input/output exception.
There was a failure in deleting the
specified profile.
You cannot select more than one
column during clone action.
You cannot select more than one
profile.
You cannot delete a permanent
column.