Cisco NCS 2000 series Troubleshooting Manual page 565

Error Messages
Error/Warning
ID
EID-4015
EID-4016
EID-4017
WID-4018
EID-4019
EID-4020
EID-4021
EID-4022
EID-4023
EID-4024
EID-4025
EID-4026
EID-4027
EID-4028
EID-4029
EID-4030
EID-4031
EID-4032
WID-4033
EID-4034
EID-4035
Error/Warning Message
Software activation is in progress. Provisioning is not
allowed.
Software activation is in progress. {0} is not allowed.
Path Trace mode cannot be set at this endpoint. The
circuit is one-way.
{0} already exists. Do you want to replace it?
Profile cannot be mapped because the UNI Port is not
in transparent mode.
Profile cannot be mapped because the transparent mode
UNI Port tagged VLAN is not {0}.
Profile cannot be mapped because SVLAN {0} is not
enabled for the NNI Port.
The user already exists.
Access control already exists for the group selected.
The View already exists.
Invalid Mask entry, cant be more then {0} the length
of OID.
CTC was unable to create a new view.
Name and Subtree OID cant be empty.
Password will be sent as plain text.
The passowrds must be at least {0} characters long.
The admitted SVLAN values must be in the range
[1-4093].
On {0} interface the Recover from Fiber Cut Fails.
Link Integrity and L2 1+1 protection cannot operate
on the same interface.
No files were specified.
Please enter a valid file name.
WDMANS parameter already present.
WDMANS parameter is not valid.
Description
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the warning message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Refer to the error message text.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
Error Messages Reference
519