Clear The Voa-Hdeg Alarm - Cisco NCS 2000 series Troubleshooting Manual

Clear the VOA-HDEG Alarm

Clear the VOA-HDEG Alarm
SUMMARY STEPS
1. Complete the
DETAILED STEPS
Complete the Physically Replace a Card, on page 453
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
VOA-HFAIL
Default Severity: Critical (CR), Service-Affecting (SA)
Logical Objects: AOTS, OCH, OMS, OTS
The VOA High Fail alarm is raised on DWDM cards when an equipped VOA exceeds the setpoint due to an
internal problem. The alarm indicates that the attenuation has crossed the high fail threshold. The card must
be replaced.
Clear the VOA-HFAIL Alarm
SUMMARY STEPS
1. Complete the
DETAILED STEPS
Complete the Physically Replace a Card, on page 453
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html
en/us/support/web/tsd-cisco-worldwide-contacts.html
your country.
VOA-LMDEG
Default Severity: Minor (MN), Non-Service-Affecting (NSA)
Logical Objects: AOTS, OCH, OMS, OTS
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
432
Physically Replace a Card, on page 453
procedure for the alarmed card.
Physically Replace a Card, on page 453
procedure for the alarmed card.
to obtain a directory of toll-free Technical Support numbers for
procedure for the alarmed card.
http://www.cisco.com/c/en/us/support/index.html
procedure for the alarmed card.
for more information or log into
Alarm Troubleshooting
http://www.cisco.com/c/