Clear The Fe-Manwkswbk-Span Condition - Cisco NCS 2000 series Troubleshooting Manual

Alarm Troubleshooting

Clear the FE-MANWKSWBK-SPAN Condition

SUMMARY STEPS
1. To troubleshoot the FE condition, determine which node and card is linked directly to the card reporting
the FE condition. For example, an FE condition on a card in Slot 12 of Node 1 could relate to a main
alarm from a card in Slot 6 of Node 2.
2. Log into the node that is linked directly to the card reporting the FE condition.
3. Complete the
DETAILED STEPS
Step 1 To troubleshoot the FE condition, determine which node and card is linked directly to the card reporting the FE condition.
For example, an FE condition on a card in Slot 12 of Node 1 could relate to a main alarm from a card in Slot 6 of Node
2.
Step 2
Log into the node that is linked directly to the card reporting the FE condition.
Step 3 Complete the Clear a BLSR External Switching Command, on page 448
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
FE-MANWKSWPR-SPAN
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
Logical Object: STMN
The Far-End Span Manual Switch Working Facility to Protect condition occurs when a four-fiber BLSR span
is switched from working to protect at the far-end node using the Manual Span command. This condition is
only visible on the network view Conditions tab and is accompanied by WKSWPR. The port where the Manual
Switch occurred is indicated by an M on the network view detailed circuit map.
Clear the FE-MANWKSWPR-SPAN Condition
SUMMARY STEPS
1. To troubleshoot an FE condition, determine which node and card link directly to the card reporting the
FE alarm. For example, an FE condition on a card in Slot 12 of Node 1 could link to the main condition
from a card in Slot 6 of Node 2.
2. Log into the node that links directly to the card reporting the FE condition.
3. Complete the
Clear a BLSR External Switching Command, on page 448
Clear a BLSR External Switching Command, on page 448
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
Clear the FE-MANWKSWBK-SPAN Condition
procedure.
procedure.
http://www.cisco.com/c/en/us/support/index.html
procedure.
199