Tim-Mon - Cisco NCS 2000 series Troubleshooting Manual

TIM-MON

Step 3
If the alarm does not clear, ensure that the signal has not been incorrectly routed. (Although the system routes circuits
automatically, the circuit route could have been changed using TL1.) If necessary, manually correct the routing using
TL1. For instructions, refer to the SONET TL1 Reference guide.
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical Support
Website at http://www.cisco.com/c/en/us/support/index.html
en/us/support/web/tsd-cisco-worldwide-contacts.html
your country.
TIM-MON
Default Severity: Minor (MN), Non-Service-Affecting (NSA)
Logical Object: TRUNK
The TIM Section Monitor TIM alarm is similar to the
TXP_MR_2.5G, TXPP_MR_2.5G, TXP_MR_10E, TXP_MR_10E_C, TXP_MR_10E_L, and MXP_2.5G_10G
cards when they are configured in transparent mode. (In transparent termination mode, all SONET overhead
bytes are passed through from client ports to the trunk ports or from trunk ports to client ports.)
Clear the TIM-MON Alarm
SUMMARY STEPS
1. Complete the
DETAILED STEPS
Complete the Clear the TIM Alarm, on page 415
If the condition does not clear, log into the Technical Support Website at
for more information or call Cisco TAC (1 800 553-2447).
TIM-P
Default Severity: Critical (CR), Service-Affecting (SA) for STSTRM; Default Severity: Minor (MN),
Non-Service-Affecting (NSA) for STSMON
Logical Object: STSMON, STSTRM
The TIM Path alarm occurs when the expected path trace string does not match the received path trace string.
Path Trace Mode must be set to Manual or Auto for the TIM-P alarm to occur.
In manual mode at the Path Trace window, the user types the expected string into the Current Expected String
field for the receiving port. The string must match the string typed into the Transmit String field for the sending
port. If these fields do not match, the login node raises the TIM-P alarm. In Auto mode on the receiving port,
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
416
to obtain a directory of toll-free Technical Support numbers for
Clear the TIM Alarm, on page 415
procedure.
for more information or log into
TIM , on page 415 alarm, but it applies to TXP_MR_10G,
procedure.
http://www.cisco.com/c/en/us/support/index.html
Alarm Troubleshooting
http://www.cisco.com/c/