Cisco NCS 2000 series Troubleshooting Manual page 589

Error Messages
Error/Warning
ID
EID-6214
EID-6215
EID-6216
EID-6217
EID-6218
EID-6219
EID-6220
EID-6221
EID-6222
EID-6223
EID-6224
EID-6225
EID-6226
EID-6227
EID-6228
EID-6229
EID-6230
Error/Warning Message
The port is already assigned to a side.
Error provisioning the CVLAN ID. Enter a valid
number or range between 0 and 4094.
Changing card will reset the optical thresholds to the
default setting and may affect the optical connection.
The optical connection will work only if the optical
performance is compatible with {0} card. Please check
the network design.
You cannot delete the {0} {1}.
Invalid ethernet duplex value
Invalid committed info rate
Invalid Ethernet speed value
Invalid mtu value
Invalid flow control value
Invalid Network Interface Mode
Invalid ingress COS value
Invalid ethertype value
Invalid buffer size value
Invalid egress QOS value
Invalid QinQ working Mode
Configured protection status Not Supported
The number of provisioned entries exceeds the limit
Description
The selected port is already assigned
to a side.
The entered CVLAN ID was out of
the admitted range.
Refer to the error message text.
You cannot delete {0} {1} because it
is part of an ADM peer group or one
or more circuits are provisioned on it.
the Ethernet duplex value is invalid.
Enter again.
The committed info rate value is
invalid. Enter again.
The Ethenet speed value is invalid.
Enter again.
The MTU value is invalid. Enter
again.
The flow control value is invalid.
Enter again.
The network interface mode value is
invalid. Enter again.
The ingress COS value is invalid.
Enter again.
The Ethertype value is invalid. Enter
again.
The Buffer size value is invalid. Enter
again.
The egress QOS value is invalid. Enter
again.
The QinQ working mode is invalid.
Enter again.
The protection status is not supported
Refer to the error message text.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
Error Messages Reference
543