Cisco NCS 2000 series Troubleshooting Manual page 559

Hide thumbs Also See for NCS 2000 series:
Table of Contents

Advertisement

Error Messages
Error/Warning
ID
EID-3313
EID-3314
EID-3315
EID-3316
EID-3317
EID-3318
EID-3319
EID-3320
EID-3321
EID-3322
EID-3323
EID-3324
EID-3325
EID-3326
EID-3327
EID-3328
EID-3330
EID-3331
EID-3334
Error/Warning Message
The offset cannot be modified because the service state
of the port is IS.
The requested action is not allowed. The state value is
invalid.
This operation cannot be performed.
The node side is invalid.
The ring name is too long.
The ring name is invalid.
The wrong line was selected.
The optical link could not be deleted.
This feature is unsupported by this version of software.
The equipment is not plugged in.
The APC system is busy.
There is no path to regulate.
The requested action is not allowed.
The input was invalid.
An error occurred while retrieving thresholds.
An error occurred while applying changes to row {0}.
The value is out of range.
Unable to switch to the byte because an overhead
channel is present on this byte of the port.
An error occurred while applying changes to the row.
Timing parameters on the protect port cannot be
changed.
Description
Refer to the error message text.
Refer to the error message text.
CTC is unable to perform operation.
This task was applied to the wrong
node side.
Reduce the number of characters in
the name.
The name you entered is illegal.
Select another line
CTC cannot delete the optical link.
Refer to the error message text.
Plug-in the equipment and proceed.
Automatic Power Control (APC)
system is busy.
There is no circuit path to regulate.
Generic DWDM provisioning failure
message.
The input value is incorrect.
There was an error retrieving the
thresholds. This message is displayed
only for the OSCM/OSC-CSM line
thresholds.
There was an error applying the
changes to the specified row. The
value is out of range.
Refer to the error message text.
Refer to the error message text.
You cannot change timing parameters
on protect port.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
Error Messages Reference
513

Advertisement

Table of Contents
loading

Table of Contents