Cisco NCS 2000 series Troubleshooting Manual page 538

Error Messages Reference
Error/Warning
ID
WID-2165
WID-2166
WID-2167
WID-2168
WID-2169
WID-2170
WID-2171
WID-2172
EID-2173
EID-2174
WID-2175
WID-2176
WID-2178
WID-2179
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
492
Error/Warning Message
The MAC address of the node {0} has been changed.
All circuits originating from or dropping at this node
will need to be repaired.
The node cannot be inserted into the domain because
it is not initialized.
You have insufficient security privileges to perform
this action.
The following warnings surfaced while loading {0}.
{1}
One or more of the profiles selected do not exist on one
or more of the nodes selected.
The profile list on node {0} is full. Please delete one
or more profiles if you wish to add the profile. {1}
You have been logged out. Click OK to exit CTC.
The CTC CORBA (IIOP) listener port setting of {0}
will be applied on the next CTC restart.
The port is unavailable. The desired CTC CORBA ({0})
listener port, {1}, is already in use or you do not have
permission to listen on it. Please select an alternate port.
An invalid number was entered. Please check it and try
again.
An extension byte mismatch occurred. {0}
Not all spans have the same OSPF area ID. This will
cause problems with protection switching. To determine
the OSPF area for a given span, click on the span and
the OSPF area will be displayed in the pane to the left
of the network map.
Only one edit pane can be opened at a time. The
existing pane will be displayed.
No update is available because the circuit has been
deleted.
Error Messages
Description
Repair the circuits that originate from
or drop at the specified node, with the
new MAC address.
Initialize the node and proceed.
You do not have the privilege to
perform this action.
CTC encountered warnings while
loading the alarm profile import file.
The profile selected does not exist on
the node. Select another profile.
The number of profile that can exist
on a node has reached the limit. To
add a profile, delete any of the existing
profiles.
Refer to the warning message text.
The Internet Inter-ORB Protocol
(IIOP) listener port setting for the CTC
Common Object Request Broker
Architecture (CORBA) will be applied
on the next CTC restart.
Select an alternate port, as the current
port is either in use or you do not have
enough permission on it.
You entered an invalid firewall port
number. Try again.
There is a mismatch with the extension
byte.
Refer to the warning message text.
Refer to the warning message text.
Refer to the warning message text.