Cisco NCS 2000 series Troubleshooting Manual page 564

Error Messages Reference
Error/Warning
ID
WID-4002
EID-4003
EID-4004
EID-4005
EID-4006
EID-4007
WID-4008
EID-4009
EID-4010
EID-4011
WID-4012
EID-4013
EID-4014
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
518
Error/Warning Message
CAUTION: Reverting to an earlier software release
may result in TRAFFIC LOSS and loss of connectivity
to the node. It may require onsite provisioning to
recover. If the node was running {0} before, reverting
will restore the {0} provisioning, losing any later
provisioning. If the node was running some other
version, reverting will LOSE ALL PROVISIONING.
{1} {2}
The Cisco IOS console is disabled for the card in Slot
{0}.
An error occurred while canceling the software upgrade.
{0} encountered while performing a database backup.
The file {0} does not exist or cannot be read.
The size of the file {0} is zero.
A software upgrade is in progress. {0} cannot proceed
during a software upgrade. Please try again after the
software upgrade has completed.
{0} encountered while restoring the database.
The operation was terminated because: {0}
An error occurred during provisioning: {0}
Node management for {0} is not provided.
CAUTION: Reverting to an earlier software release
may result in TRAFFIC LOSS and loss of connectivity
to the node. It may requireonsite provisioning to
recover. If the node was running {0} before, reverting
will restore the {0} provisioning, losing any later
provisioning. If the node was running some other
version, reverting will LOSE ALL PROVISIONING.
{1} {2} {3}
The manual path trace mode for this equipment does
not support an expected string consisting of all null
characters. Please change the expected string or the
path trace mode.
Error Messages
Description
Refer to the warning message text.
The card may not be an IOS-based
card or it may be rebooting.
CTC encountered an error while
cancelling the software upgrade.
CTC encountered the specified error
during database backup.
Refer to error message.
The size of the file that is being
backed up or restored is zero.
The specified action cannot be
performed during a software upgrade.
You must try after the upgrade process
is completed.
CTC encountered the specified error
while restoring the database.
Refer to the error message text.
Refer to the error message text.
Refer to the warning message text.
Refer to the error message text.
The path trace mode does not support
strings that consist of null characters.
You must either change the expected
string or the path trace mode.