Cisco NCS 2000 series Troubleshooting Manual page 533

Error Messages
Error/Warning
ID
EID-2074
EID-2075
EID-2077
EID-2078
EID-2079
EID-2080
EID-2081
EID-2082
EID-2083
EID-2085
EID-2086
EID-2087
EID-2088
EID-2089
EID-2090
EID-2091
EID-2092
Error/Warning Message
Select one or more profiles.
This column is permanent and cannot be reset.
This column is permanent and cannot be renamed.
At least two columns must be highlighted.
The alarm types cannot be loaded into table. There are
no reachable nodes from which the list of alarm types
can be loaded. Please wait until such a node is reachable
and try again.
The node {0} has no profiles.
An error occurred while removing profile {0} from the
node {1}.
The profile {0} does not exist on the node {1}.
An error occurred while adding profile {0} to the node
{1}.
The profile selection is invalid. No profiles were
selected.
The node selection is invalid. No nodes were selected.
No profiles were selected. Please select at least one
profile.
The profile name is invalid.
Too many copies of {0} exist. Please choose another
name.
No nodes were selected. Please select the node(s) on
which to store the profile(s).
Unable to switch to the node {0}.
A general exception error occurred.
Description
You have not selected any profile or
column. Reset operation is done by
right-clicking the selected column.
A permanent column cannot be reset.
You cannot rename a permanent
column.
You cannot compare two profiles
unless you select two columns.
Refer to the error message text.
The specified node does not have any
profiles.
There was an error while removing the
specified profile from the specified
node.
CTC cannot find the specified profile
from the specified node.
There was an error adding the
specified profile to the specified node.
You tried to select an invalid profile.
Select another profile.
You tried to select an invalid node.
Select another node.
Refer to the error message text.
The profile name cannot be empty.
Select a unique name.
You must select one or more nodes on
which you can store the profile.
CTC is unable to switch to the
specified node.
CTC encountered a general exception
error while trying to complete the task.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
Error Messages Reference
487