Cisco NCS 2000 series Troubleshooting Manual page 591

Hide thumbs Also See for NCS 2000 series:

Table of Contents

Error Messages

Error/Warning

Error/Warning Message

The data cannot be retrieved because ANS parameters

cannot be calculated on the node in its current

configuration.

Invalid Margin For Span Aging.

SDH mode does not support timing references.

Only DS1 interfaces with ESF line types support timing

sendDoNotUse and sendDoNotUseFF are mutually

The termination is already in use.

The side is carrying services or traffic.

A pluggable module on Port 22 remains unmanaged.

You cannot delete this port. There was a severe

architectural error related to the index of the pluggable

trunk port object. Please contact technical support for

This is not a valid VLAN ID. The VLAN database is

The equipment requires two slots.

The patchcord is duplicated.

The wavelength is in use by an OCH trail, a virtual link,

or an internal patchcord.

The card cannot be changed because the port has not

been provisioned.

Each port can have a maximum of 8 MAC addresses.

This server trail does not have a valid start or end.

The maximum number of server trails is 3743.

A unique server trail ID could not be allocated.

The server trail already exists.

The server trail size must not exceed the port

Refer to the error message text.

Timing reference is not supported by

Refer to the error message text.

The user adds a row without a valid

VLAN database loaded.

The user provisions a double footprint

card in a single slot.

Refer to the error message text.

Cisco NCS 2000 series Troubleshooting Guide, Release 11.0

Error Messages Reference

Troubleshooting