Cisco NCS 2000 series Troubleshooting Manual page 590

Error Messages Reference
Error/Warning
ID
EID-6231
EID-6232
EID-6233
EID-6234
EID-6235
EID-6236
EID-6237
EID-6238
EID-6239
EID-6240
EID-6242
EID-6243
EID-6244
EID-6245
EID-6246
EID-6247
EID-6248
EID-6249
EID-6250
EID-6251
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
544
Error/Warning Message
This is not a valid VLAN ID.
The VLAN remapping ID is not allowed.
The CVLAN is duplicated.
The VLAN ID is out of range.
This is not a valid VLAN name.
The protected VLAN number exceeds the maximum
allowed.
The port is not in OOS disabled admin state
The VLAN ID is in use.
APC wrong node side.
You cannot change the Admin State for an interlink
port when it is part of an ADM peer group. This
operation is not supported.
The protection slot is invalid.
The {0} address of {1} is invalid.
The mask of {0} is invalid.
The cost must be between 1 and 32767.
The {0} address cannot be {1}.
The authentication type is invalid.
The cost must between 1 and 15.
The port has a cross-connect.
The reversion time is invalid.
Invalid Margin For Span Aging. Value is not in the
range 0 - 10.
Error Messages
Description
Entered VLAN ID is not present in the
database file.
Refer to the error message text.
You cannot have identical CVLAN
IDs.
The VLAN ID entered is out of range.
The entered VLAN name exceeds the
number of characters (32) allowed.
The user enters more than 256
protected VLAN in the VLAN
database.
Refer to the error message text.
The entered VLAN ID is in use by a
node.
Refer to the error message text.
Refer to the error message text.
You must select a valid protection slot.
Refer to the error message text.
The mask of the specified value is not
valid.
Refer to the error message text.
Refer to the error message text.
Enter a valid authentication type.
Refer to the error message text.
Refer to the error message text.
The reversion time is invalid. Enter
again.
Enter a value between 0 and 10.