Show Config - Dell C9000 Series Reference Manual

Version
7.5.1.0
6.1.1.0
Usage Information If you do not use the set weight command, router-originated paths have a weight
attribute of 32768 and all other paths have a weight attribute of zero.

show config

Display the current route map configuration.
C9000 Series
Syntax
show config
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Example
Dell(config-route-map)#show config
!
route-map hopper permit 10
Dell(config-route-map)#
Description
Introduced on the C-Series.
Introduced on the E-Series.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Access Control Lists (ACL) 388