Address-Family - Dell C9000 Series Reference Manual

address-family

Enable the IPv4 multicast or the IPv6 address family.
C9000 Series
Syntax
address-family {ipv4 [vrf vrf-name | multicast vrf vrf-name]| ipv6
unicast [vrf vrf-name]}
Parameters
ipv4 multicast
Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.4.(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
6.5.1.0
Enter the keyword ipv4 followed by the keyword multicast to
enable BGPv4 multicast mode.
Description
Introduced on the C9010.
Introduced on the S3048–ON and S4048–ON.
Added support for IPv6 VRF.
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced
Border Gateway Protocol 412