Installing The Mx240 Normal-Capacity Fan Tray; Figure 89: Installing The Air Filter - Juniper MX240 Hardware Manual

Related
Documentation

Installing the MX240 Normal-Capacity Fan Tray

Copyright © 2017, Juniper Networks, Inc.

Figure 89: Installing the Air Filter

Maintaining the MX240 Air Filter on page 378
Removing the MX240 Air Filter on page 269
Preventing Electrostatic Discharge Damage to an MX240 Router on page 444
To install the fan tray (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Grasp the fan tray handle, and insert it straight into the chassis. Note the correct
2.
orientation by the
this side up
Tighten the captive screws on the fan tray faceplate to secure it in the chassis.
3.
Figure 90 on page 232):
label on the top surface of the fan tray.
Chapter 21: Installing Components
231