Re-S-1800 Routing Engine Description For Mx Series; Re-S-1800 Routing Engine Components; Figure 16: Re-S-1800 Front View - Juniper MX240 Hardware Manual

Related
Documentation

RE-S-1800 Routing Engine Description for MX Series

Figure 16: RE-S-1800 Front View

Auxiliary Ethernet
port port
Extractor
clip
Console USB Reset
port port button

RE-S-1800 Routing Engine Components

Copyright © 2017, Juniper Networks, Inc.
router boots is called the primary boot device, and the other disk is the alternate boot
device.
NOTE: If the router boots from an alternate boot device, a yellow alarm lights
the LED on the router's craft interface.
Booting in a RE-S-X6-64G and in a RE-S-X6-64G-LT Routing Engine follows this
sequence—the USB device, SSD1, SSD2, and LAN. SSD1 is the primary boot device. Boot
sequence is tried twice for SSD1 and SSD2.
MX240 Routing Engine LEDs on page 31
Removing an MX240 Routing Engine on page 275
Installing an MX240 Routing Engine on page 232
MX240 Routing Engine Serial Number Label on page 429
Figure 16 on page 27 shows the Routing Engine 1800.
SSD SSD
slot 1 slot 2
Extractor
clip
RE-S-1800 Routing Engine Components on page 27
RE-S-1800 Routing Engine Boot Sequence on page 28
Figure 17 on page 28 shows the RE-S-1800 Routing Engine.
Chapter 5: Host Subsystem Components and Descriptions
27