Holding An Mx240 Fpc - Juniper MX240 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX240:

Table of Contents

MX240 3D Universal Edge Router Hardware Guide

Documentation

Holding an MX240 FPC

Total CPU DRAM

Total RLDRAM

Total DDR DRAM

Issue the CLI

show chassis fpc pic-status

FPC installed in DPC slots

user@host> show chassis fpc pic-status

An FPC takes up two DPC slots when installed on an MX Series

router. The slot number corresponds to the lowest numbered DPC slot.

For further description of the output from the command, see the

MX240 Flexible PIC Concentrator (FPC) LEDs on page 59

Holding an MX240 FPC on page 388

Storing an MX240 FPC on page 392

Troubleshooting the MX240 FPCs on page 406

Replacing an MX240 FPC on page 302

Many components on the FPC are fragile. Failure to handle FPCs

as specified in this document can cause irreparable damage.

An FPC configured with PICs installed can weigh as much as

18 lb (8.2 kg). Be prepared to accept the full weight of the FPC as you lift it.

To prevent damage when handling or carrying FPCs:

37 degrees C / 98 degrees F

2008-11-25 11:16:43 PST

25 minutes, 26 seconds

command. The following example shows an

DPC 40x 1GE R

10x 1GE(LAN)

MX FPC Type 3

1x OC-192 SONET

CLI Explorer