MX240 3D Universal Edge Router Hardware Guide
Compliance Statements for NEBS
Compliance Statements for Acoustic Noise for the MX240 Router
Related
Documentation
482
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
The battery return connection is to be treated as an isolated DC return (i.e. DC-I), as
defined in GR-1089-CORE.
For Juniper Networks systems with AC power supplies, an external surge protective
device (SPD) must be used at the AC power source.
The router complies with NEBS Level 3 requirements:
GR-63-CORE: NEBS, Physical Protection
GR-1089-CORE: EMC and Electrical Safety for Network Telecommunications Equipment
Agency Approvals for MX Series Routers on page 479
MX240 Compliance Statements for NEBS
Compliance Statements for EMC Requirements for the MX240 Router
Compliance Statements for Environmental Requirements for Juniper Networks Devices
on page 481
Copyright © 2017, Juniper Networks, Inc.