Storing An Mx240 Dpc; Figure 160: Do Not Rest The Dpc On An Edge - Juniper MX240 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX240:

Table of Contents

MX240 3D Universal Edge Router Hardware Guide

Documentation

Storing an MX240 DPC

If you must rest the DPC temporarily on an edge while changing its orientation between

vertical and horizontal, use your hand as a cushion between the edge and the surface.

Maintaining MX240 DPCs on page 382

MX240 DPC Terminology

Storing an MX240 DPC on page 386

Troubleshooting the MX240 DPCs on page 404

Replacing an MX240 DPC on page 297

You must store a DPC as follows:

In the router

In the container in which a spare DPC is shipped

Horizontally and sheet metal side down

When you store a DPC on a horizontal surface or in the shipping container, always place

it inside an antistatic bag. Because the DPC is heavy, and because antistatic bags are

fragile, inserting the DPC into the bag is easier with two people. To do this, one person

holds the DPC in the horizontal position with the faceplate facing the body, and the other

person slides the opening of the bag over the DPC connector edge.