Mx240 Craft Interface Overview; Figure 6: Front Panel Of The Craft Interface - Juniper MX240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide
Table 5: MX240 Router Hardware Components and CLI Terminology (continued)
Component Hardware Model Number
DC power supply PWR-MX480-DC
PWR-MX480-1600-DC
PWR-MX480-2400-DC
Power supply blank PWR-BLANK-MX960
panel
Related
Documentation

MX240 Craft Interface Overview

Figure 6: Front Panel of the Craft Interface

Related
Documentation
12
MX240 Router Overview on page 3
MX240 DPC Port and Interface Numbering on page 51
MX240 MIC Port and Interface Numbering on page 75
MX240 PIC Port and Interface Numbering on page 60
MX Series Router Interface Names
The craft interface allows you to view status and troubleshooting information at a glance
and to perform many system control functions. It is hot-insertable and hot-removable.
The craft interface is located on the front of the router above the card cage and contains
LEDs for the router components, the alarm relay contacts, and alarm cutoff button. See
Figure 6 on page 12.
NOTE: At least one SCB must be installed in the router for the craft interface
to obtain power.
MX240 Alarm LEDs and Alarm Cutoff/Lamp Test Button on page 13
MX240 Alarm Relay Contacts on the Craft Interface on page 13
CLI Name
DC Power Entry Module
DC Power Entry Module
DC 2.4kW Power Entry
Module
N/A
Copyright © 2017, Juniper Networks, Inc.
Description
"MX240 DC Power Supply
Description" on page 92
"MX240 Power System
Description" on page 89