MX240 3D Universal Edge Router Hardware Guide
Installing the MX240 Air Filter
270
Figure 112: Removing the Air Filter
To install the air filter (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Locate the up arrow and ensure that the air filter is right side up.
2.
Slide the air filter straight into the chassis until it stops.
3.
Align the captive screws of the air filter cover with the mounting holes on the chassis.
4.
Tighten the captive screws on the air filter cover.
5.
Figure 113: Installing the Air Filter
Figure 89 on page
231):
Copyright © 2017, Juniper Networks, Inc.