Figure 66: Removing An Fpc - Juniper MX240 Hardware Manual

3d universal edge router

Hide thumbs Also See for MX240:

Table of Contents

MX240 3D Universal Edge Router Hardware Guide

Documentation

The weight of the FPC is concentrated in the back end. Be

prepared to accept the full weight—up to 18 lb (8.2 kg)—as you slide the

FPC out of the chassis.

When the FPC is out of the chassis, do not hold it by the ejector handles,

bus bars, or edge connectors. They cannot support its weight.

Figure 66: Removing an FPC

Tools and Parts Required to Replace MX240 Hardware Components on page 226

Installing the MX240 Chassis in the Rack Manually on page 189

Reinstalling Components in the MX240 Router After Installing it without a Lift on

Preventing Electrostatic Discharge Damage to an MX240 Router on page 444