Connecting The Router To The Network; Connecting The Router To External Devices And Cables - Juniper MX204 Hardware Manual

CHAPTER 14

Connecting the Router to the Network

Tools and Parts Required to Connect the MX204 Router to External Devices
Related
Documentation
Connecting the MX204 Router to External Devices and Cables
Copyright © 2018, Juniper Networks, Inc.
Tools and Parts Required to Connect the MX204 Router to External Devices on page 83
Connecting the MX204 Router to External Devices and Cables on page 83
To connect the router to external devices, you need the following tools and parts:
2.5-mm flat-blade (–) screwdriver for the alarm relay contacts
Electrostatic discharge (ESD) grounding wrist strap (provided in the accessory kit)
Verifying the MX204 Router Parts Received on page 60
Connecting the MX204 Router to External Devices and Cables on page 83
Prevention of Electrostatic Discharge Damage on page 156
Figure 39 on page 84 shows the front panel of the MX204 router. All the connections to
the router are made through the front panel.
83