Interface Modules-Fpcs And Pics; Mx240 Flexible Pic Concentrator (Fpc) Description; Figure 23: Typical Fpcs Supported On The Mx240 Router - Juniper MX240 Hardware Manual

Interface Modules—FPCs and PICs

MX240 Flexible PIC Concentrator (FPC) Description

Copyright © 2017, Juniper Networks, Inc.
Protocols and Applications Supported by the Multiservices DPC (MS-DPC)
MX240 Flexible PIC Concentrator (FPC) Description on page 57
MX240 Flexible PIC Concentrator (FPC) LEDs on page 59
FPCs Supported by MX240, MX480, and MX960 Routers on page 59
MX240 PIC Description on page 59
MX240 PIC Port and Interface Numbering on page 60
MX240 PIC LEDs on page 61
PICs Supported by MX240, MX480, and MX960 Routers on page 62
A Flexible PIC Concentrator (FPC) occupies two DPC slots on an MX Series router. The
DPC slots are numbered 1/0
in either slots and , or slots
1/0 1
The interface corresponds to the lowest numbered DPC slot for which the FPC is installed.
Figure 23 on page 57 shows typical FPCs supported on the MX240 router.

Figure 23: Typical FPCs Supported on the MX240 Router

MX-FPC2
If a slot is not occupied by a DPC, an FPC, or an SCB, a blank panel must be installed to
shield the empty slot and to allow cooling air to circulate properly through the router.
Chapter 6: Line Card Components and Descriptions
, 1 , and 2 , bottom to top. One FPC can be installed horizontally
and on the front of the router (see
1 2
FPC3
Figure 24 on page 58).
57