Figure 26: Mx240 Mic Interface Port Mapping - Juniper MX240 Hardware Manual

MX240 3D Universal Edge Router Hardware Guide
76
NOTE: The MIC number is not included in the interface name.
The MX240 router supports up to three MPCs that install horizontally and are numbered
from bottom to top. Each MPC accepts up to two MICs.
Figure 26 on page 76 shows an example of a 20-port Gigabit Ethernet MIC with SFP
installed in slot of an MPC in slot
0
NOTE: The 20-port Gigabit Ethernet MIC with SFP-E has a different port
numbering. See Gigabit Ethernet MIC with SFP (E)

Figure 26: MX240 MIC Interface Port Mapping

1 0 1 2
0
2
1
1/0
0
The MIC contains two logical PICs, numbered
PIC contains 10 ports numbered
The
show chassis hardware
with SFP — 3D 20x 1GE(LAN) SFP
) is shown as
Type 2 3D EQ
— are shown as
SFP PIC 0
user@host> show chassis hardware
...
FPC 2 REV 28
CPU REV 06
MIC 0 REV 22
PIC 0
.
2
PIC 0 through
through .
0 9
command output displays a 20-port Gigabit Ethernet MIC
— installed in slot 0
in the CLI. The MIC's two logical PICs —
FPC 2
and .
PIC 1
750-031090 YH8181
711-030884 YH9437
750-028392 YD0439
BUILTIN BUILTIN
PIC 1 in the CLI. Each logical
of an MPC in slot 2 . The MPC (
10x 1GE(LAN)
MPC Type 2 3D EQ
MPC PMB 2G
3D 20x 1GE(LAN) SFP
10x 1GE(LAN) SFP
Copyright © 2017, Juniper Networks, Inc.
MPC