Table 89: Tools And Parts Required To Replace Hardware Components - Juniper MX240 Hardware Manual

Copyright © 2017, Juniper Networks, Inc.

Table 89: Tools and Parts Required to Replace Hardware Components

Tool or Part
2.5-mm flat-blade (–) screwdriver
7/16-in. nut driver or socket wrench
Blank panels (if component is not
reinstalled)
Electrostatic bag or antistatic mat
Electrostatic discharge (ESD)
grounding wrist strap
Flat-blade (–) screwdriver
Phillips (+) screwdrivers, numbers 1
and 2
Chapter 20: Overview of Installing and Replacing Components
Components
Alarm relay terminal block
Cables and connectors
DC power supply
DPC
FPC
MIC
MPC
PIC
Power supply
Routing Engine
SCB
Craft Interface
SCB
DPC
FPC
PIC
MPC
MIC
Routing Engine
All
Cables and connectors
DPC
Air filter
Routing Engine
Craft interface
SCB
Cables and connectors
Fan tray
227