Connecting The Acx1000 And Acx1100 To External Devices; Connecting Acx1000 Or Acx1100 Routers To Management Devices; Connecting The Router To A Network For Out-Of-Band Management - Juniper ACX1000 Hardware Manual

Connecting the ACX1000 and ACX1100 to External
Devices
IN THIS SECTION

Connecting ACX1000 or ACX1100 Routers to Management Devices | 107

Connecting the ACX1000 or ACX1100 Router to an External Alarm-Reporting Device | 109
Connecting the ACX1000 or ACX1100 Router to External Clocking Devices | 110
Connecting ACX1000 or ACX1100 Routers to Management Devices
IN THIS SECTION

Connecting the Router to a Network for Out-of-Band Management | 107

Connecting the Router to a Management Console or Auxiliary Device | 108
To connect external devices and cables to the router, you need the following tools:
• RJ-45 Ethernet cable and RJ-45 to DB-9 serial port adapter (provided)
• Management host, such as a PC, with an Ethernet port (not provided)
Connecting the Router to a Network for Out-of-Band Management
To connect to the MGMT port on the ACX1000 or ACX1100 router:
1. Turn off the power to the management device.
2. Plug one end of the Ethernet cable into the MGMT port on the router.
connector. Figure 2 shows the port.)
(Figure 1 shows the
107