Troubleshooting The Mx240 Mics; Troubleshooting The Mx240 Mpcs - Juniper MX240 Hardware Manual

3d universal edge router
Hide thumbs Also See for MX240:
Table of Contents

Advertisement

MX240 3D Universal Edge Router Hardware Guide
Related
Documentation

Troubleshooting the MX240 MICs

Problem
Solution
Related
Documentation

Troubleshooting the MX240 MPCs

Problem
408
MX240 Flexible PIC Concentrator (FPC) LEDs on page 59
Maintaining MX240 FPCs on page 387
Holding an MX240 FPC on page 388
Storing an MX240 FPC on page 392
Replacing an MX240 FPC on page 302
Description: The MICs are not functioning normally.
Check the status of each port on a MIC by looking at the LED located on the MIC
faceplate. For information about the meaning of LED states on different MICs, see the
MX Series Interface Module Reference
Check the status of a MIC by issuing the
MIC slots in the MPC are labeled
user@host> show chassis fpc pic-status
Slot 0
Online
PIC 0
Online
PIC 1
Online
Slot 1
Online
PIC 0
Online
PIC 1
Online
PIC 2
Online
PIC 3
Online
Slot 2
Online
PIC 0
Online
PIC 1
Online
For further description of the output from the command, see the
MX240 Modular Interface Card (MIC) Description on page 70
Maintaining MX240 MICs on page 393
Replacing an MX240 MIC on page 307
Description: The MPCs are not functioning normally.
.
show chassis fpc pic-status
and
PIC 0/1
PIC 2/3
MPC Type 2 3D EQ
1x 10GE XFP
1x 10GE XFP
MPC 3D 16x 10GE
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
4x 10GE(LAN) SFP+
MS-DPC
MS-DPC PIC
MS-DPC PIC
CLI command. The
, left to right:
CLI Explorer
.
Copyright © 2017, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents