Sharp MX-3610N User Manual page 1285

TROUBLESHOOTING
FOLDING DOES NOT TAKE PLACE
Point to check
Did the administrator enable the [Disabling of
Duplex] setting?
Are you using a paper type that has a specific
front and reverse side?
Index
Solution
The paper folding function cannot be used
when [Disabling of Duplex] is enabled in the
setting mode. Check with your administrator.
"Setting mode" → [Device Control] →
[Disabling of Duplex]
The folding function cannot be used with pre-
printed paper, letterhead paper, or other
paper that has specific front or reverse sides.
When folding paper, use a paper type such as
plain paper that does not have specific front
or reverse sides.
Contents
MX-2610N / MX-3110N / MX-3610N