Sharp MX-3610N User Manual page 1116

SETTING MODE
INBOUND ROUTING SETTINGS
The fax and Internet fax received data can be forwarded according to the stored forwarding
table.
When this function is enabled, you can also have the received Internet faxes forwarded to a
specified e-mail address without printing them.
Registration of Forward Table
You can store or edit the data forwarding table that has the received data forward settings.
Up to 50 data forwarding tables can be stored.
A single forwarding table can store up to 500 sets of sender number and source address
combinations.
Up to 1000 destinations can be stored in all data forwarding tables combined.
Up to 100 destinations of FTP/Desktop/Network Folder data can be stored.
Item
Forward Table Name
Receive Line Select
Sender Number/Address
Setting
Add
Sender Number/Address
used on Forward Table
Delete
Destination 1/2/3
Destination Settings
Destination Settings (Direct
Entry)
Description
Enter a forward table name.
Selects a data receive line.
Select the sender facsimile number or the Internet fax address.
Before you select a sender number or address, store the
destination number or address.
To forward all received data, select [Forward All Received Data].
Enters your selection.
Displays the address that has been selected by the [Add] key.
Deletes the selected address.
You can set the forwarding date and destination.
Forwarding conditions: Set the data forwarding conditions.
Day of week: Select a day of week to start data forwarding.
Forwarding time: Set a clock time to start data forwarding.
Start time: Set a time to start data forwarding.
End time: Set a time to end the data forwarding.
Format: Select a format of forwarding data.
Lists the addresses that can be set as the destination. Select a
destination by setting it to
Enter the destination name directly. Tap the [Add to forwarding
destinations.] key to add the destination to the list.
MX-2610N / MX-3110N / MX-3610N
.