Sharp MX-3610N User Manual page 1163

The "Number of Calls in Auto Reception" that can be set in each country are shown in the
following table.
Country Differentiation Table
United Kingdom, France,
Germany, Sweden, Italy,
Spain, Netherlands,
Thailand, Hong Kong,
Saudi Arabia, South Africa,
Hungary, Czech Republic,
Slovakia, Poland, Greece,
Russia, Philippines,
Indonesia
Australia, New Zealand
Singapore
Malaysia, India, Canada,
Taiwan
If you select "0" for the number of rings, the machine will immediately answer and
begin fax reception without ringing in auto reception mode.
Switching from Manual to Automatic Reception
This setting can only be activated in France.
When a fax is received in manual reception mode, you have have the machine automatically
switch to auto reception. The number of rings on which switching to auto reception takes place
can be set to any number from 1 to 9.
Duplex Reception Setting
This is used to have received faxes printed on both sides of the paper.
When this setting is enabled and a fax consisting of 2 or more pages is received (the pages
must be the same size), the pages are printed on both sides of the paper.
Auto Receive Reduce Setting
When a fax is received that includes printed information such as the sender's name and
address, the received image is slightly larger than the standard size. This setting is used to
automatically reduce the image to fit the standard size.
If Auto Receive Reduce is disabled, the edges of the image outside the standard
size will be cut off. However, the image will be clearer because it will be printed
at the same size as the original.
Standard sizes are sizes such as A4 and B5 (8-1/2" x 11" and 8-1/2" x 5-1/2").
Print Style Setting
The number of rings
0 to 9
2 to 4
0 to 3
0 to 15