Sharp MX-3610N User Manual page 1073

SETTING MODE
SHARP OSA SETTINGS
You can use the Sharp OSA Settings if the machine has an External Account
Module or an Application Communication Module.
External Account Setting
External Account Control
When this setting is enabled, the machine enters external totaling mode and the totaling
function can be used via an external account application.
Enable Authentication by External Server
When this setting is enabled, the machine enters external authentication mode. Access to the
machine is controlled by the external application.
When settings are changed, the changes will take effect after the machine is
restarted. To restart the machine, see "TURNING ON THE POWER" in "BEFORE
USING THE MACHINE"
USB DRIVER SETTINGS
When installing the external account module or application communication module, set the
driver of the USB device to be connected.
External Keyboard
Select whether the internal or external driver for the external keyboard is used.
IC Card Reader/Writer
Select whether the internal or external driver for the IC card reader/writer driver is used.
USB Memory
Select whether the internal or external device driver for the USB memory device driver is used.
Level of Encryption
Select the level of encryption for communication using the external driver.
Select from none, AES-128 or AES-256.
When the external driver is selected, the connected USB device is treated as not
connected and cannot be used.
When settings are changed, the changes will take effect after the machine is
restarted.
MX-2610N / MX-3110N / MX-3610N