Sharp MX-3610N User Manual page 1035

Cancel Detection at Document Glass
Original size detection on the document glass can be disabled. When this is done, all originals
placed on the document glass are treated as special size originals.
Disabling of Document Feeder
Use this setting to prohibit the use of the automatic document feeder, such as when the feeder
malfunctions. (When the setting is enabled, scanning is still possible using the document
glass.)
Original Feeding Mode
The following original feeding modes can be set to operate by default in copy, image send,
scan to HDD, and saved in external memory device modes. When a mode is frequently used,
this saves you from having to select the mode in another mode each time you need to use it.
Mixed Size Original (Same Width (Copy mode only)/Different Width)
Slow Scan Mode
*
Blank Page Skip
* Excluding fax mode and Internet fax mode.
Disabling of Duplex
This is used to disable 2-sided printing, such as when the duplex module malfunctions.
Disabling of Large Capacity Cassette
This setting is used to prohibit the use of the large capacity tray, such as when it malfunctions.
Disabling of Optional Paper Drawer
This setting is used to disable the optional paper drawer, such as when it malfunctions.
Disabling of Tray Setting
This setting is used to prohibit tray settings (except for the bypass tray).
Disabling of Finisher
This setting is used to prohibit the use of finisher or saddle finisher, such as when it
malfunctions.
Disabling of Offset
Disables an offset.
Disabling of Stapler
This setting is used to prohibit the use of staple, such as when the staple of finisher or saddle