TROUBLESHOOTING
THE PROPERTY OF A FILE CANNOT BE SET TO [CONFIDENTIAL]
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Is the file in the Quick File folder?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Move the file to a different folder and
then set its property to
"Confidential".
[Confidential] cannot be specified for a file in
the Quick File folder. (Note that [Protect] can
be specified for a file in the Quick File folder
to prevent it from being easily deleted.)
Contents
MX-2610N / MX-3110N / MX-3610N