Sharp MX-3610N User Manual page 1077

Disables the Master Machine mode for tandem printing.
(Normally this setting is not necessary.)
Disabling of Slave Machine Mode
Disables the Slave Machine mode for tandem printing.
(Normally this setting is not necessary.)
Copy Settings
Prohibition of Program Registration
Disables the program registration.
Disabling of Bypass-Tray in Duplex Copy
Disables the use of the bypass tray when making 2-sided copies.
The bypass tray is often used to feed label sheets, transparency film, and other special media
for which 2-sided copying is prohibited.
If a sheet of one of these special media enters the reversing unit, a misfeed or damage to the
unit may result.
If special media for which 2-sided copying is prohibited is often used, it is recommended that
you enable this setting.
Disabling of Auto Paper Selection
Disables the Auto Paper Selection function.
When this setting is enabled, automatic selection of paper that is the same size as the original
on the document glass or in the automatic document feeder does not take place.
Prohibition of Custom Image Registration
Disables the registration of custom images.
Prohibit utilize sending function at copy
Disables the Image Send function during copy.
Printer Settings
Prohibit Notice Page Printing
Disables to print a notice page.
Prohibit Test Page Printing
Disables to print the test page.
When this setting is enabled, "Printer Test Page" in Setting mode cannot be used to print test
pages.
Exclude Bypass-Tray from Auto Paper Select
When [Auto] is selected for paper type selection, the bypass tray is excluded from the trays