Sharp MX-3610N User Manual page 1132

SETTING MODE
POWER MANAGEMENT SETTINGS
The Auto Power Shut-Off can be enabled or disabled, and the Preheat Mode can be set.
This function reduces your power costs, and at the same time helps conserve natural
resources and reduce pollution.
Preheat Mode Setting
The time until Preheat Mode activates can be set to any number of minutes from 1 to 240.
Preheat Mode will activate when the set duration of time elapses after printing ends and no
further operations are performed. This function reduces your power costs, and at the same
time helps conserve natural resources and reduce pollution.
Select the time that best suits the needs of your workplace.
The panel display can be turned Off in the Preheat mode.
Preheat mode cannot be disabled.
The Auto Power-Off transition time is fixed.
The Auto Power-Off transition time is fixed.
When this setting is enabled, the [Change transition time by time of day.] option is disabled.
If the Auto Power-Off is disabled, the time you have set here is disabled.
AS SOON AS THE REMOTE JOB IS FINISHED, ENTER
AUTO POWER SHUT OFF MODE.
This function works in Auto Power-Off mode. When the machine receives a print job from
the PC, the machine prints out the data, and immediately returns to the Auto Power-Off
mode.
Change Transition Time by Time of Day
This function controls the power optimally for each time period by analyzing the use of the
machine based on job logs obtained during a 4-week period.
When this setting is enabled, the [Fix transition time] option is disabled.
The image transfer control settings are not changed.
This does not link to the Power On/Off Scheduling. If both of them are
enabled, the Power On/Off Scheduling settings precede.
Pages are counted for each paper size separately.
MX-2610N / MX-3110N / MX-3610N